Anticorrosion Additives for Metal Working

During metal working processes, metals are in contact with fluids of different natures and of different functions : lubricants, degreasers, cutting oils, grinding fluids, etc... These fluids must protect metals from corrosion, but also cutting tools. Water-based fluids (emulsions or solutions) more and more replace mineral fluids, more harmful and difficult to dispose. It is the reason why Ascotec has developped a complete range of anticorrosion additives for metal working, designed for each application.

THE RANGE

Most of the anticorrosion additives developped by ASCOTEC® for metal working are fully hydrosoluble and VOC-free. It makes their use very easy.
They are free from heavy metals, and don't contain any bore, nitrite, silicate or molybdate.
USES MAIN PROPERTIES
ASCOTRAN-L
  • Soluble lubricants
  • Grinding fluids
  • Cutting oils
  • Water-based degreasers
  • Rinsing baths
  • Multimetal protection
  • Neutral to low alkaline media
  • Non foaming
  • Stable in hard water
  • VOC-free
ASCOTRAN-NS
  • Water-based degreasers
  • Neutralizing baths after acid operations
  • Protection of ferrous metals
  • Very alkaline media
  • Low use dosages
ASCOTRAN-BW
  • Water-based degreasers
  • Rinsing baths
  • Protection of technical alloys (Al, Mg, Ni, Zn, Cu)
  • Neutral to low alkaline media
  • VOC-free

ASCOTEC®
8 rue Jean Servanton - ZAC Scheurer Kestner - 42000 Saint-Etienne - FRANCE
Tél : +33(0)4 77 57 58 46 - Fax : +33(0)4 77 57 24 82

:: Comète :: Agence de communication Lyon