ASCONIUM® 142DA in Waterborne Direct-To-Metal system
ASCONIUM® Corrosion Inhibitors, as unique proprietary technology, can provide excellent long-term anticorrosion performance to paints and clear coatings.
ASCONIUM® 142DA shows excellent results in waterborne Direct-To-Metal systems which can achieve perfomance complying up to C5 corrosion class requirements (ISO 12944).
- Efficient at low dosage
- Outperforming usual anticorrosion pigments
- Improving adhesion of coating on metal
- Improving film’s water resistance
- Reducing film blistering
WB ACRYLIC COATING
Salt Spray to ISO 9227 – 1000h
Adhesion ISO2409 24h after testing
Cold-rolled steel – 120µm dry
A Direct-To-Metal paint can replace system [primer, mid-coat and topcoat] as a single layer. Thanks to ASCONIUM® 142DA , Direct-To-Metal coatings will have all the below expected properties:
- High level of anti-corrosion performance
- Very good adhesion performance on metal
- High gloss level
- Possibility of colouring
WB ACRYLIC COATING
Salt Spray to ISO 9227 – 1440h
100µm dry
ASCOTEC® has developed several guide formulations for waterborne Direct-To-Metal systems, find them on UL PROSPECTOR.
Discover the other applications for the ASCONIUM® range and their advantages.
